HC-06 BLUETOOTH MODÜLÜNÜN İSMİNİ NASIL DEĞİŞTİREBİLİRİM?

HC-06 BLUETOOTH MODÜLÜNÜN İSMİNİ NASIL DEĞİŞTİREBİLİRİM?

kodlar:

const int LED =13;                      //  set Led indicator  (pin nbr)

const int BTPWR=12;                     //  set  Power          (pin nbr)

char nomeBT[13]="HC - 08";            //  set Char " new Name & numbers of caracters of this new name [13] "

char pin[5]="0007";


void setup(){

 pinMode(LED, OUTPUT);                             // set LED Output                  

 pinMode(BTPWR, OUTPUT);                             // set LED Power Output 



 digitalWrite(LED, LOW);

 digitalWrite(BTPWR, HIGH);



 Serial.begin(9600);                             //  SET Baud Rate Speed 

 Serial.print("AT");                              //  SET Module to " Program Mode "

 delay(1000);

 Serial.print("AT+NAME");                          //  SET Module to " Program New Name "

 Serial.print("BAYRAM YAPICI");                       //  SET "  New Name "

 Serial.print("\r\n");

 delay(1000);                     
 

 Serial.print("AT+BAUD:");                           //  SET Baud SPEED  "to Comm with Module "

 Serial.print("9600");                                //  SET Baud SPEED   

 Serial.print("\r\n");

 delay(1000);

 Serial.print("AT+PIN");                                //  SET MOdule to " new Password "

 Serial.print("0007");                                   //  SET " Password "      default = ( 1234 )

 Serial.print("\r\n");

 delay(1000);

 digitalWrite(LED, HIGH);                                  //  all  Job is DONE Congrats ! visit : www.bikemanuelcesar.com       !

}

void loop(){

}